Gears Gen X3/X4 Foot Warmer Y-Cord

FEATURES

• Y cord is used to run Gears Foot Warmers on its own or along with other heated clothing 
• Comes with an on/of switch in the wiring harness 
• Sufficient length allows user to route harness through the pant loops and drop them down towards the foot warmers 
• Very start of the Y cord has male coax plug which will go to the power source and a female coax plug which can be used to connect other heated clothing or gloves/glove liners along with their required cable (If intending to use the upper clothing along with the foot warmers in the same circuit). 
• The two output male coax on the other ends connect to the Foot Warmers. 
• The wire that drops down from the right loop is kept longer (assuming the battery connection is done from left side). 
• Gears coax DC connector plugs are 5.5 mm in size.